Upload Siemens S7-200 Program using PPI cable

Dear PLC Technical members, 

Welcome to our followers on the Blog PLC Technical, today in this article I will introduce you how to upload Siemens S7-200 Program using the PPI cable point to point interface. I can only now explain this application to you.

I. Upload Siemens S7-200 Program using PPI cable

In this part, I will guide you how to upload Siemens S7-200 Program using PPI cable, even though the S7-200 is an old PLC, I wanted to share this article because it still needs revision and fault tracking.

But first I will also explain to you several CPU modules for the S7-200, and let us take a look at USB ,MPI,DP,Point to point adapter cable for Siemens S7-200, NetWork Adapter for S7 System.

1. USB adapter cable for Siemens S7-200

USB Adapter Siemens S7-200 PLC programming cable, five meters with communication indicator, direct use the Step7 software, USB adapter, for upload Siemens S7-200 program at the level the PLC Siemens.

Features: 

• Support the Siemens S7-200-300-400 PLC communications
• Support PPI-MPI-DP communications
• Install drive, without generating serial, directly select USB

2. CPU modules

CPU221:

• 6 digital inputs
• 4 digital outputs
• Not expandable with modules
• Siemens article number: 6ES7211-0BA22-0XB0

CPU222:

• 8 digital inputs
• 6 digital outputs
• Up to 2 expansion modules
• Siemens article number: 6ES7212-1AB22-0XB0

CPU224:

• 14 digital inputs
• 10 digital outputs
• Max. 7 expansion modules
• Siemens article number: 6ES7214-1BD22-0XB0

CPU224XP:

• 14 digital inputs
• 10 digital outputs
• 2 analog inputs
• 1 analog output
• Up to 7 expansion modules
• Siemens article number: 6ES7214-2AD23-0XB0

CPU226:

• 24 digital inputs
• 16 digital outpus
• Maximum 7 expansion modules
• Siemens article number: 6ES7216-2BD22-0XB0

CPU 224 SIMATIC S7-200

3. HOW TO UPLOAD S7-200 PROGRAM FROM CPU 224 TO PC

1. Create a new project
2. Communication: interface parameter assignments used select PC/PPI cable. PPI
3. Should be USB if you are connecting with a PPI to PC
4. The Read button reads PLC and selects it from the drop down list for upload
5. Upload program from CPU 224 to PC: Press upload the PC will read the PLC
6. The Program uploads successfully

Have a gander at this article to see the software used STEP7-Micro/WIN for uploading the program SIMATIC S7-200 CPU 224.using the Siemens PPI câble.

Starting STEP 7-Micro/WIN Open the Micro/win STEP7 programming, click " settings PG/PC interfaces " fasten and choose " PC/PPI cable (PPI)" After you click on the " Properties " button, appeared in the accompanying figure:

Set the neighborhood sequential number in the interface and mark off the" modem association: USB or COM. Checking the communication Parameters for Micro/WIN: Check that the location of the PC/PPI link in the Interchanges discourse box is set to 0. Check that the interface for the arrange parameter is set for PC/PPI cable(COM4). Check that the transmission rate is set to 9.6 kbps Double tap the " connection ", the accompanying figure: At the point when you transfer a project to your PC utilizing Micro/WIN, the S7-200 transfers the program and memory. To transfer your Project from a S7-200 CPU:  Select the File > Upload menu order.  Snap the Upload Button. The program is being uploaded to the PC The Program uploads successfully From here we have finished the subject of the upload Siemens S7-200 Program using PPI cable from PLC to PC, if you like it, please share it with friends until it benefits, and then meet on a new topic on blog PLC Technical.  Regards, PLC Technical